The ICL-2100 is a dual-channel opto sensor with two manual and four automatic operating modes. This device replaces two single-channel opto sensors with the advantage of no mutual interaction between each single channel. The device settings can be changed with the related software only. It is possible to program eight different basic settings which can be selected via DIP switch. The Master/Slave operation provides the possibility to synchronize two of the following amplifiers: ICL-2100, ICL-6100 and ICL-8100. That means that a system of two combined amplifiers works with 2, 4, 6, 8, 10, 12, 14 or even 16 totally independent channels.
| Number of channels |
2 |
| Multiplex-speed |
10 ms |
| Range (using transmitter ITL with receiver IRH) |
12 m (39 ft) |
| Range (using transmitter ITH with receiver IRH) |
19 m (62 ft) |
| Range (using transmitter ITA with receiver IRH) |
35 m (115 ft) |
| Operating modes |
2 manual / 4 automatic |
| Transmit frequency |
4 kHz |
| Switching outputs |
24 V DC, 100 mA short-circuit proof |
| Response time |
12 ms |
| Alarm output |
24 V DC, 100 mA short-circuit proof |
| Analog output |
0...10 V |
| Test input |
24 V DC |
| Interface |
The RS232-Interface is exclusively suitable for the communication between the ICL-2100 and the software WinICL |
| Supply voltage |
24 V DC ± 20% |
|
