1. SIKA Digital Thermometers

The digital thermometers of the SolarTemp product series work with a discrete-time measuring method. The cycle time of the measurement starts from 3 sec, so that the operator can read the current measured value in passing. The SolarTemp has an easy-to-read LCD-based display.The instruments of the SolarTemp series have a robust mechanical construction and are designed for industrial use as well as for use under difficult environmental conditions. The IP65 protection class (front side) meets these requirements. The immunity to electromagnetic interference complies with the requirements of the applicable industry standards.

After start-up, the instrument performs an internal self-test, checking the functionality of the connected sensor as well. Automatic diagnostic routines in the microprocessor permanently monitor the sensor signal for plausibility and can thus signal a sensor break via the display unit. The results are displayed as a message. By supplying the measuring instrument via the transmitter, the solar cell is only loaded in the event of failure of the current loop, thus providing a safe, independent local display.

• Powered by the current loop itself with backup via solar cell → temperature display even in the case of power supply failure
• One measuring point for local display and transmitter signal → no measured value deviation & lower costs per measuring point
• Robust mechanical construction → Reliable and long-lasting operation
• Insensitive to electromagnetic interference → Additional EMC shielding
• Integrated transmitters → Simple integration into process control system
• Two separate measuring circuits and continuous self-test → Maximum operational reliability

The digital thermometers of the CargoTemp product series work with a discrete-time measuring method. The cycle time of the measurement starts from 3 sec, so that the operator can read the current measured value in passing. The DiTemp has an easy-to-read LCD-based display. The instruments of the DiTemp series have a robust mechanical construction and are designed for industrial use as well as for use under difficult environmental conditions. The immunity to electromagnetic interference complies with the requirements of the applicable industry standards. After start-up, the instrument performs an internal self-test, checking the functionality of the connected sensor as well. Automatic diagnostic routines in the microprocessor permanently monitor the sensor signal for plausibility and can thus signal a sensor break via the display unit. The results are displayed as a message.

• Good readability of the process parameters. Large and high-contrast LCD
• Oil and temperature resistant FEP connection cable
• With 6 markings every 5 meters for depth indication, tension up to 50 N
• Can be used in EMC-critical applications

The digital thermometers of the DiTemp product series work with a discrete-time measuring method. The cycle time of the measurement starts from 3 sec, so that the operator can read the current measured value in passing. The DiTemp has an easy-to-read LCD-based display. Two different display versions are available. The core idea for the design of the dual display unit is to create a similarity to the conventional pointer instrument. We have succeeded in doing this with a circular LCD module. With the analogue display, you get the same overview as with conventional pointer instruments. The exact temperature value can also be read from the 3½-digit 7-segment display.

The instruments of the DiTemp series have a robust mechanical construction and are designed for industrial use as well as for use under difficult environmental conditions. The immunity to electromagnetic interference complies with the requirements of the applicable industry standards. After start-up, the instrument performs an internal self-test, checking the functionality of the connected sensor as well. Automatic diagnostic routines in the microprocessor permanently monitor the sensor signal for plausibility and can thus signal a sensor break via the display unit. The results are displayed as a message. All operating states are monitored by the electronics. In contrast to mechanical devices, the user has a significantly more reliable and long-term stable measuring system at hand.

• Intuitive recognition of process parameters and trends. Dual display unit
• Robust mechanical construction. Reliable and long-lasting operation
• Optionally integrable transducers. Easy integration into process control system
• Simple signalling of critical operating states. Freely programmable switching contacts
• Up to 10 years of energy self-sufficient operation. Long-lasting lithium battery

The digital thermometers of the DiTemp product series work with a discrete-time measuring method. The cycle time of the measurement starts from 3 sec, so that the operator can read the current measured value in passing. The DiTemp has an easy-to-read LCD-based display. Two different display versions are available. The core idea for the design of the dual display unit is to create a similarity to the conventional pointer instrument. We have succeeded in doing this with a circular LCD module. With the analogue display, you get the same overview as with conventional pointer instruments. The exact temperature value can also be read from the 3½-digit 7-segment display.

The instruments of the DiTemp series have a robust mechanical construction and are designed for industrial use as well as for use under difficult environmental conditions. The immunity to electromagnetic interference complies with the requirements of the applicable industry standards. After start-up, the instrument performs an internal self-test, checking the functionality of the connected sensor as well. Automatic diagnostic routines in the microprocessor permanently monitor the sensor signal for plausibility and can thus signal a sensor break via the display unit. The results are displayed as a message. All operating states are monitored by the electronics. In contrast to mechanical devices, the user has a significantly more reliable and long-term stable measuring system at hand.

• Intuitive recognition of process parameters and trends. Dual display unit
• robust mechanical construction. Reliable and long-lasting operation
• optionally integrable transducers. Easy integration into process control system
• simple signalling of critical operating states. Freely programmable switching contacts
• up to 10 years of energy self-sufficient operation. Long-lasting lithium battery

The digital thermometers of the DiTemp product series work with a discrete-time measuring method. The cycle time of the measurement starts from 3 sec, so that the operator can read the current measured value in passing. The DiTemp has an easy-to-read LCD-based display. The instruments of the DiTemp series have a robust mechanical construction and are designed for industrial use as well as for use under difficult environmental conditions. The IP65 protection class (front side) meets these requirements. The immunity to electromagnetic interference complies with the requirements of the applicable industry standards. After start-up, the instrument performs an internal self-test, checking the functionality of the connected sensor as well. Automatic diagnostic routines in the microprocessor permanently monitor the sensor signal for plausibility and can thus signal a sensor break via the display unit. The results are displayed as a message.

• Good readability of the process parameters. High contrast LCD
• robust mechanical construction. Reliable and long-lasting operation
• continuous self-test. Maximum operational reliability
• up to 4 years of energy self-sufficient operation. Long-lasting lithium battery
• no complex wiring required, 10 years lifetime (display unit)