Flowmeters for liquids

DUG - float rotameter (flow switch) for liquids with a control scale on the sight glass. The instrument is factory calibrated for a bottom-up flow of liquids during vertical installation. However, the instrument has a spring-loaded float that allows it to be mounted in any spatial position, including horizontal or vertical with the flow in the opposite direction. In this case, on-site calibration may be necessary to compensate for the weight of the float.

DWG is a floatmeter (flow switch) for liquids with a measuring scale on the sight glass. The instrument is factory calibrated for upward flow when mounted vertically.

RVO/U-1 is a floatmeter (flow switch) for liquids with a scale on the sight glass. The instrument is factory calibrated for upward flow when mounted vertically. However, it is equipped with a spring loaded float that permits installation in any spatial position, including horizontal or vertical with flow in the opposite direction. In this case on-site calibration may be necessary to compensate for the weight of the float.

RVO/U-2 is a floatmeter (flow switch) for liquids with a scale on the sight glass. The instrument is factory calibrated for upward flow when mounted vertically. However, it is equipped with a spring loaded float that permits installation in any spatial position, including horizontal or vertical with flow in the opposite direction. In this case, on-site calibration may be necessary to compensate for the weight of the float.

RVO/U-4 is a floatmeter (flow switch) for liquids with a scale on the sight glass. The instrument is factory calibrated for upward flow when mounted vertically. However, it is equipped with a spring loaded float that permits installation in any spatial position, including horizontal or vertical with flow in the opposite direction. In this case, on-site calibration may be necessary to compensate for the weight of the float.

DUM is a floatmeter (flow switch) for liquids in an all-metal housing. The unit is factory calibrated for upward flow in vertical installation. However, it is equipped with a spring loaded float, which allows installation in any spatial position, including horizontal or vertical with flow in the opposite direction. In this case, on-site calibration may be necessary to compensate for the weight of the float.

DUM/A is a floatmeter (flow switch) for liquids in an all-metal housing with a pointer indicator. The instrument is factory calibrated for upward flow when mounted vertically from the bottom. However, it is equipped with a spring-loaded float, which permits installation in any spatial position, including horizontal or vertical with flow in the opposite direction. In this case, on-site calibration may be necessary to compensate for the weight of the float.

DWM-L float flowmeter (flow switch) for liquids in an all-metal housing. It is factory calibrated for upward flow when mounted vertically.

DWM/A-L float flowmeter (flow switch) for liquids in an all-metal housing with an arrow indicator. It is factory calibrated for upward flow when mounted vertically.

RVM/U-1 float flowmeter (flow switch) for liquids in an all-metal housing. The instrument is factory calibrated for upward flow when mounted vertically from the bottom. However, it has a spring-loaded float, which allows it to be mounted in any spatial position, including horizontal or vertical with flow in the opposite direction. In this case, on-site calibration may be necessary to compensate for the weight of the float.

RVM/U-2 float flowmeter (flow switch) for liquids in an all-metal housing. The instrument is factory calibrated for upward flow in a vertical installation. However, it has a spring-loaded float, which allows it to be mounted in any spatial position, including horizontal or vertical with flow in the opposite direction. In this case, on-site calibration may be necessary to compensate for the weight of the float.

RVM/U-4 is an all-metal floatmeter (flow switch) for liquids in an all-metal housing. The instrument is factory calibrated for upward flow in a vertical installation. However, it has a spring-loaded float, which allows it to be mounted in any spatial position, including horizontal or vertical with flow in the opposite direction. In this case, on-site calibration may be necessary to compensate for the weight of the float.

RVM/U-S4 is an all-metal floatmeter (flow switch) for liquids in an all-metal housing. The instrument is factory calibrated for upward flow when mounted vertically. However, it has a spring-loaded float, which allows it to be mounted in any spatial position, including horizontal or vertical with flow in the opposite direction. In this case, on-site calibration may be necessary to compensate for the weight of the float.

RVM/UA-1 float flowmeter (flow switch) for liquids in an all-metal housing with an arrow indicator. The instrument is factory calibrated for bottom-to-top fluid flow when mounted vertically. However, a spring-loaded float is provided, allowing the unit to be mounted in any spatial position, including horizontal or vertical with flow in the opposite direction. In this case, on-site calibration may be necessary to compensate for the weight of the float.

RVM/UA-2 float flowmeter (flow switch) for liquids in an all-metal housing with an arrow indicator. The instrument is factory calibrated for bottom-to-top fluid flow when mounted vertically. However, a spring-loaded float is provided, allowing the unit to be mounted in any spatial position, including horizontal or vertical with flow in the opposite direction. In this case, on-site calibration may be necessary to compensate for the weight of the float.

RMU-A and RMU-B float flowmeter (flow switch) for liquids operate with the float measuring principle. Universal orientation and high reliability. Low sensitivity to dirt and infinitely variable switch point adjustment by operator. High pressure resistance and threaded connection, special thread on request.

The WBM-65 is a floatmeter (flow switch) for liquids in an all-metal housing with flange connection. The instrument is factory calibrated for bottom-to-top fluid flow when mounted vertically. However, the instrument has a spring-loaded float, allowing it to be mounted in any spatial position, including horizontal or vertical with flow in the opposite direction. In this case, on-site calibration may be necessary to compensate for the weight of the float.

The WBMC is a floatmeter (flow switch) for liquids in an all-metal housing. The instrument is factory calibrated for upward flow when mounted vertically from the bottom. However, it has a spring-loaded float, which allows it to be mounted in any spatial position, including horizontal or vertical with flow in the opposite direction. In this case, on-site calibration may be necessary to compensate for the weight of the float.

The 2100, 2150, 2300 and 2340 flow monitors operate on the float measuring principle. Easy installation, small size, low pressure drop, diverse options - adjustable limit switches, controller RCA and RCD (constant flow regulation with differential pressure). The specified measuring / switching ranges are valid for water having a density of 1.00 kg/dm3, vertical installation of the device and flow direction from bottom to top. The magnet inside the float activates a bi-stable Reed contact inside the PVC switch housing. Please specify Normally Open (NOC) or Change Over (COC) when ordering.

The 6001 and 6002 flow monitors operate on the float measuring principle. Features: Easy installation, Minimal pressure loss, Good chemical resitance, Infinitely variable switch point adjustment by operator, EX-version according to ATEX directive available, Borosilicate glass, Plastic protective shield, Flow directly readable on the scale, Threaded connection (6001) or flange connection (6002). Options: Adjustable limit switches, analog transmitter.

The instruments, type SC-250, are variable area flowmeter. Features: High reliability, Product designated scale at no charge, EX-version according to ATEX directive available, Low pressure drop, Flange connection, special process connection on request. Options: Adjustable limit switch contacts, Analog transmitter, Damping mechanism, Fully hygienic design available.

M-21 flowmeter for liquids (0,007 - 17 l/min) and gaseous media (0,2 - 500 Nl/min) operate on the float measuring principle. A valve for flow regulation is available as an option.

WY flow monitor and indicator for liquids operate on the float measuring principle. The measuring- / switch ranges are valid for water having a density of 1.00 kg/dm³, vertical installation of the device and flow direction from bottom to top. Operating density for water at 20 °C and 1.013 bar (absolute value): 1.00 kg/dm³. Upon request, special scales for deviating media, different operating conditions and installation positions (only for devices which can be installed in any position) are available. The specified switch values are switch-off points, i.e. switch values by decreasing flow. Other measuring- /switch ranges are available upon request.

Flowmeter in plastic for liquids and gases operate on the float measuring principle. Wide measuring range. Materials to suit application. Optional analog output.