Jump to page №

High Power Opto Sensors ISM and ICL series

ISM-4000

ISM-4000

ISM-4000

Made in Germany

Four channel multiplexed system with manual and automatic operation modes. Menu-driven setup allows individual parameter setting for each channel. Sensor error monitoring shows error messages on the LCD display during normal operation. Info screens for each channel indicate the current settings and performance. Multiple ISM units can be synchronized using the master slave function, up to 40 virtually independent beams. Computer interface for remote diagnostic and remote programming.

Number of channels 4
Multiplex-speed 18 ms
Range (using transmitter ITL with receiver IRL / IRH) 10 m / 15 m (33 ft / 49 ft)
Range (using transmitter ITH with receiver IRL / IRH) 12 m / 25 m (39 ft / 82 ft)
Range (using transmitter ITA with receiver IRL / IRH) 25 m / 60 m (82 ft / 197 ft)
Operating modes 2 manual / 4 automatic
Transmit frequency 4 kHz
Switching outputs 60 V AC / DC short-circuit proof
Response time 20 ms
Alarm output PNP 24 V, 100 mA
Error output PNP 24 V, 100 mA
Analog output 0...10 V
Test input 24 V DC
Interface The RS232-Interface is exclusively suitable for the communication between the ISM-4000 and the software WinISM.
Supply voltage 24 V DC