Single Loop Temperature Controller KS50-1 KS52-1

The universal KS 50-1 temperature controller is intended for precise and cost-effective control tasks. The instrument provides simple 2-point (on/off) control, continuous PID control or 3-point stepping control. The process value signal is connected via a universal input. A supplementary analog input can be used for heating current measurement or as an external set-point input. The KS 50-1 has three process outputs that can be 3 relays or 2 relays plus a universal output. This universal output can be used for operating a solid-state relay, a continuous current/voltage output or to energize a two-wire transmitter. Optionally there are two additional optocoupler outputs that can be used freely.

• Universal continuous/switching version - for reduced stock
• 100 ms cycle time - suitable for fast control loops
• 20ms as shortest pulse - for very fast / strong actuators
• Freely configurable analog output, e.g. as process value output
• Customer-specific linearisation for all sensors
• Settings can be blocked via password and internal switch for high security
• Extended temperature range up to 60°C - allows mounting close to the process
• Easy 2-point or offset measurement correction
• Emergency operation after sensor break by means of the “output hold“ function
• Logical combination of digital outputs, e.g. for general alarm
• Programmer with 10 segments and “end“ signal
• RS 422/485 Modbus RTU interface
• Built-in transmitter power supply
• Two switchable parameter sets
• Self-Tune to setpoint without oscillation
• 3-point controller for water, fan or oil cooling
• Start-up circuit boost functions

Available models and options expand / close