Jump to page №

Limit value switches

Capacitive level switches Capcont LL Capcont LS

Capacitive level switches Capcont LL Capcont LS

Capacitive level switches
Capcont LL
Capcont LS

Made in Germany

Description

The level limit switch Capcont LS is suitable for limit value detection of also as dry run protection in liquids and viscous substances and also in powdery and fine granular substances. Like e.g. grain, flour, powdered milk, mixing food, cement, chalk or gypsum.

It can be used in electrically conductive as well as in non-conductive materials. The device is certificated for the use as overflow protection acc. to WHG.

Capcont LS with integrated evaluation electronic is a compact filling level limit switch for supervision of filling levels.

Function

The device is a capacitive operating sensor for limit value detection. Electrode rod, filling material and container wall creates an electrical capacitor. The contact of the electrode rod with the filling material produces a variation in capacity. That is evaluated by the electronic and converted in a correspondent switching action. The detection of a filling level signal is indicated at the plug side of the device by a yellow LED and converted into a switching command and output at the PNP switching output. This allows the drive of relays, contactors, magnetic vents, optical indicators, horns as well as of SPS inputs.

At a switching reaction, the voltage of the connection terminal 1 (+L) is output alternating by two contrary operated semiconductor switches at two connection terminals. The adjustment of the responsitivity of the device to the respective filling material is done by a potentiometer.

Capcont LS is mounted from the top side of the pressure container or of the pipe. Capcont LL is mounted from the top side or into the side wall of the pressure container or of the pipe.

Spannungsversorgung 10 V ... 35 V DC
Stromaufnahme ≤ 10mA Schaltausgang im Leerlauf
Funktion PNP-Transistorausgang, auf Kontakt +L
Ausgangsstrom ≤ 500mA strombegrenzt, kurzschlussfest
Sperrstrom ≤ 100µA
Verzögerungszeit ≤ 200ms
Schalthysterese Abhängig vom Medium
Empfindlichkeitsabgleich Trimmer mehrgängig
Elektrodenstabisolation PTFE – Polytetrafluorethylen (Teflon), PEEK
Prozessanschluss Stahl 1.4404 (AISI 316L), Stahl 1.4571 (AISI 316Ti)
Gerätestecker M12x1 Fassung:CrNi-Stahl, PUR
Dichtungen FPM – Fluorelastomer (Viton), EPDM – Etylen-Propylen-Dienmonomer
Umgebungstemperatur -40°C ... +100°C (Einschränkungen bei Ex-Ausführung)
Prozesstemperatur Capcont LS: -40°C ... +100°C, Capcont LL: -40°C ... +140°C
Prozessdruck Capcont LS: -1 bar ... +1 bar, Capcont LL: -1 bar ... +10 bar
Schutzart IP68

Examples of supplied versions: expand / close

Capcont LS01VCA0SB Capcont X2LS01VCA0SB
Capcont LS11VCA0SB Capcont X2LS11VCA0SB
Capcont LS03VCA0SB Capcont X2LS03VCA0SB
Capcont LS13VCA0SB Capcont X2LS13VCA0SB
Capcont L20VCA1S0 Capcont X2L20VCA1S0