The MAXIMAT VK C are level limit switches which are used for containers of water-polluting liquids to prevent an overfilling; When liquid lift up, the integrated electronics reacts to the float rising and its permanently output signal is interrupted; By interrupting the signal once the permissible limit of filling is exceeded, the associated system control may interrupt the filling process and acoustically and visually trigger an alarm.
The MAXIMAT SHR CS measuring transducer is used as power supply, current band monitor and alarm relay. It serves in combination with the overfill sensors and leakage sensors included in the MAXIMAT VK..., MAXIMAT LW... and MAXIMAT C... series, as well as MAXITOP... limit switches, as part of overfill inhibitors and leakage detection systems.
MAXIMAT TC4 is a signaling device for up to 4 overfill prevention devices or leakage detectors of MAXIMAT C ... series, with optical and acoustic signals according to the approval principles for overfill prevention devices.
The sensor MAXIMAT LW VK is designed to detect conductive liquids non-electrically conductive. The detection results from the position of a magnet inside the float and a Reed contact inside the probe. It is necessary to use it with a SHR C transducer. The liquids may not generate deposit originating jamming of float.
The MAXIMAT CST is used for delivering power supply to the: MAXIMAT C ..., MAXIMAT LW ..., CAPSYTRON series. A signaling, control and/or actuating device can be activated with the relay output.
MAXIMAT TC1 is a signaling unit for overfill and leakage detectors MAXIMAT (X series) and MAXITOP. The detector is powered directly by TC1 unit. The built-in buzzer provides local alarm to the operator, and the LEDs inforrm visually about the alarm status. The audible alarm is acknowledged through the push-button on the right side.
MAXIMAT TC1-B is an optical and audible alarm unit for dry-contact detectors. The built-in buzzer provides local alarm to the operator and the LED inforrm visually on the alarm status. The audible alarm is acknowledged with the push-button on the right side.
Manufactured part numbers open, use the search ctrl + F
|
